Panasonic TH-55LFV70U Operating Instructions Manual Download Page 94

Page: 94 / 97

Shipping condition

This function allows you to reset the unit to the factory setting.

Press to display the Setup menu.

Options

Display Serial Number

Software Licenses

Shipping

YES

5
6

Wait for 10 seconds.

Press the power switch (

) on main unit to turn the power off.

Setup

1/2

Signal

Display ID settings

Monitor out(Digital)

Auto

Multi display settings

Backup input settings

Screensaver

Input label

ECO mode settings

Wobbling

Off

DIGITAL LINK out
Power ON screen delay

OSD language

English(UK)

Press for more than 3 seconds.

Press to select “YES”.

Press to select “OSD Language”.

Press to select “Shipping”.

Press to display the Shipping menu.

Press to confirm.

[from the unit]

1. Press the MENU button till the Setup menu is displayed.
2.

Press the Up “ ” or Down “ ” button to select “OSD Language”.

3. Press and hold the INPUT button till the Shipping menu is displayed.
4.

Press the Volume Up “+” or Down “–” button to select “YES”.

5. Press the INPUT button and wait for 10 sec.
6. Press the power switch (

) on main unit to turn the power off.

Summary of Contents for TH-55LFV70U


































































































Search results

Summary of Contents for TH-55LFV70U

Reviews:

Panasonic TH-55LFV70U, Operating Instructions Manual, Page: 94 / 97

Search results

Summary of Contents for TH-55LFV70U

Reviews: