manualshive.com logo in svg

Panasonic TH-55LFV70U, Operating Instructions Manual, Page: 82 / 97

Share
Download
Panasonic TH-55LFV70U Operating Instructions Manual Download Page 82

82

USB Media Player

1. Function description

It is a function designed to play stored files by inserting USB memory that stores still and moving image files and then 

changing the input to USB.

Single Media Player

Files are played by a single unit of LFV70.

 

USB

Multi Media Player

Connecting more than one unit with LAN cable reproduces files in USB memory simultaneously.

One of the units becomes Master, and the others Slaves. 

The example below shows two-unit connection.

                                     LFV70(Master)                                  LFV70(Slave)

 

USB

USB

                                                        Hub or broadband router

This operates with daisy chain connection of DIGITAL LINK (P20) as well.

2. USB memory

For Media Player, provide the following files in USB memory.

•  Play file
• 

Scenario

• 

File list

Summary of Contents for TH-55LFV70U


































































































Reviews:

No comments