56
SETUP
ECO Mode Settings
Setup
1/2
Signal
Display ID settings
Monitor out(Digital)
Auto
Multi display settings
Backup input settings
Screensaver
Input label
ECO mode settings
Wobbling
Off
DIGITAL LINK out
Power ON screen delay
OSD language
English(UK)
1
select
2
adjust
On
On
On
On
Off
ECO Mode settings
Power save
ECO Mode
Custom
No signal power off
Enable
HDMI power management
DVI-D1 power management
DVI-D2 power management
PC power management
ECO Mode
Custom:
The menu of power consumption reduction is individually set.
On:
The following fixed values are set to the menu of power consumption reduction. Individual setting is not available.
No Signal power off: Enable
HDMI Power management: On
DVI-D1 Power management: On
DVI-D2 Power managemanet: On
PC Power managemanet: On
Power save: On
Using Remote Control
When
is pressed, the “ECO Mode” setting changes.
ECO Mode
On
Custom settings
The menu of the power consumption reduction is individually set. This setting is enabled when “ECO Mode” is set to
“Custom”.
No signal power off
Equipment power supply is turned Off when there is no signal.
When this is set to “Enable”, the power supply of the unit goes Off 10 minutes after the input signals stop.
Note:
•
This function is effective during normal viewing (one picture screen).
PC Power management
•
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
•
When no pictures are detected for 30 or so seconds during PC signal input:
→ Power is turned off (standby); the power indicator lights up orange.
•
When pictures are subsequently detected:
→ Power is turned on; the power indicator lights up green.
Notes:
•
This function operates only during input from PC IN terminal.
• This function is effective when “Sync” is set to “Auto” and during normal viewing (one picture screen).
DVI-D / HDMI Power management
•
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
•
When no pictures (sync signal) are detected for 30 or so seconds during DVI-D1 or DVI-D2 / HDMI signal input:
→ Power is turned off (standby); the power indicator lights up orange.
•
When pictures (sync signal) are subsequently detected:
→ Power is turned on; the power indicator lights up green.
Note:
•
This function operates only during each input.
Power save
This function adjusts the brightness of the backlight to reduce power consumption.
•
Off:
This function does not operate.
•
On:
Backlight brightness is reduced.