70
Options Adjustments
Item
Adjustments
Input lock
Locks the input switch operation.
Off
HDMI
DisplayPort
DIGITAL LINK
DVI-D1
DVI-D2
PC
COMPONENT/RGB
VIDEO
USB
Off
Notes:
• Only the adjusted signal is displayed.
• Input switch can be used when this is set to “Off”.
Button lock
Off
On
MENU
Off:
All the buttons on main unit can be used.
MENU:
Locks
MENU
button on main unit.
On:
Locks all the button on main unit except the POWER button.
Sets Button lock with the unit buttons in the following procedure.
Off:
Press + four times→Press
INPUT
four times→Press - four times→Press MUTE
MENU:
Press MUTE
four times→Press
+
four times→Press INPUT four times→Press
MUTE
On:
Press - four times→Press MUTE four times→Press + four times→Press MUTE
Remocon User level
Off
User1
User2
User3
Off:
You can use all of the buttons on the remote control.
User1:
You can only use , , , , ,
buttons on the remote control.
User2:
You can only use and button on the remote control.
User3:
Locks all the buttons on remote control.
PC Auto Setting
Off
On
Off:
When the AUTO SETUP key of the remote control is operated, or when the “Auto setup” of the
POSITION menu is performed, the Auto function operates.
On:
In addition to operation of a remote control and the OSD menu, an Auto Setup function is dynamically
perfomed to the first signal to recieve.
Off-timer function
Enable:
Enables the “Off-timer function”.
Disable:
Disables the “Off-timer function”.
Note:
When “Disable” is set, the Off-timer is cancelled.
Initial Power Mode
Normal
On
Standby
Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.
Normal:
Power returns in as the same state as before the power interruption.
Standby:
Power returns in standby mode. (Power Indicator : red/orange)
On:
Power returns in power On. (Power Indicator : green)
Note:
When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.
Clock Display
Off:
Not display the clock.
On:
Display the clock.
The clock is displayed at the lower left of the screen when button is pressed.
10:00
Note:
When “Day/Time settings” is not set, the clock is not displayed even if
“Clock Display” is “On”.
LAN Control
Protocol
Select the LAN control protocol.
Protocol 1:
Control with the Panasonic Display sequence.
Protocol 2:
Control with the sequence that compatible with Panasonic Projector.
Information Timing
Set up the informing manner if error warning occured.
POWER Button Lock
(TH-55LFV70U only)
Set the lock setting for POWER button in unit buttons on back of the display.
Off:
POWER button operation is enabled.
On:
POWER button operation is disabled.
Note:
This function is enabled for only TH-55LFV70U. For TH-55LFV70W, it will not appear on the menu.
Normalisation
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User Level” or
“Controller ID function” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the
[ ]
button on main unit together with
button on the remote control and hold for more than 5 seconds. The
“Shipping” menu is displayed and the lock is released when it disappears.