manualshive.com logo in svg

Panasonic TH-55LFV70U, Operating Instructions Manual, Page: 62 / 97

Share
Download
Panasonic TH-55LFV70U Operating Instructions Manual Download Page 62

62

SETUP

Function Button Setting

Assigns specific functions to the numeric buttons (<0> to <9>). The buttons can be used as shortcut keys by assigning 

frequently used operations.

 

 Setup

 2/2

 Set up timer

 Day/Time settings

 60 sec

  Control Settings

 Network settings

 USB media player settings

 

Function button settings

 Display orientation
 OSD position

 Upper/Right

 Landscape

 Menu display duration
 Menu transparency

 20

1

Press to display the Setup menu.

2

Press to select “Function button settings”.

Press to display the Function button settings screen. 

Function Group

Functions assignable to the numeric buttons.

[INPUT] (Direct input select)

Input can be selected with single-touch operation.

HDMI / DisplayPort / DIGITAL LINK / DVI-D1 / DVI-D2 / PC / Component/

RGB / VIDEO / USB

[MEMORY] ([Memory load])

Memory can be loaded with single-touch operation.

[MEMORY1] - [MEMORY8]

• 

[MEMORY1] to [MEMORY8] load functions are already assigned to <1> to 

<8> respectively. These settings cannot be changed.

 

 Function button settings

 Function group

 Input

 Function button 1

 HDMI

 Function button 2

 DisplayPort

 DIGITAL LINK

 Function button 3
 Function button 4

 Function button 8

 DVI-D1

 VIDEO

 Function button 5

 Function button 9

 Function button 6

 Function button 0

 Function button 7

 Function button guide

 DVI-D2

 USB

 PC

 ---

 Component/RGB

 On

[SHORTCUT]

[Signal], [Screensaver], [Set up timer], [ECO mode settings], [Multi display settings], [AV mute]

•  Pressing the numeric button displays the menu screen. Pressing the button again exits the menu screen.

[AV Mute]

• 

Pressing the numeric button mutes the audio and pictures. 

To cancel, press any button on the remote control.

Shipping condition

The following functions are assigned to the numeric buttons as factory default.

INPUT

MEMORY

SHORTCUT

1 HDMI

MEMORY1

Signal

2 DisplayPort

MEMORY2

Screen Saver

3

DIGITAL LINK

MEMORY3

Set up timer

4 DVI-D1

MEMORY4

ECO mode settings

5 DVI-D2

MEMORY5

Multi display settings

6 PC

MEMORY6

AV mute

7

Component/RGB

MEMORY7

---

8 VIDEO

MEMORY8

---

9 USB

---

---

0 ---

---

---

Function Button Guide

Sets the function display when numeric buttons are pressed. Set this for each function group.

[On]:

 Displays the function list for the numeric buttons.

[Off]:

 Does not display the function list. Operation starts when numeric buttons are pressed.

Note:

•  When <FUNCTION GROUP> is pressed, [Function Button Guide] will be displayed regardless of the [On] / [Off] 

settings.

Summary of Contents for TH-55LFV70U


































































































Reviews:

No comments