Panasonic TH-55LFV70U Operating Instructions Manual Download Page 60

Page: 60 / 97

SETUP

Set up TIMER

Set the program for turning the power On/Off and select the input signal at the specified time. Up to 20 programs can be

set.

[Setting Example]

Program 1, Every Monday, 12:00, Power On, Input: VIDEO

Set up timer

Present time

SUN

10 : 00

Program

Timer function

Day
Power mode
Time
Input

MON

Power on

12 : 00

VIDEO

select

adjust

Set the program number.

To execute the program, set to “On”.

The program is disabled when “Off” is set.

Set the day.

The program is executed every day when “Everyday” is se

Set the power On/Off.

Set the time.

Pressing “ ” or “ ” button once changes “Time” 1 minute.

Pressing “ ” or “ ” button continuously changes “Time” by 15

minutes.

Set the input.

Notes:

• This function cannot be set unless “PRESENT TIME Setup” is set.
•

If more than one programs are set for the same time, only the program with the smallest program number is enabled.

Control Settings

Configure the settings for serial communication and remote control operation.

Setup

2/2

Set up timer

Day/Time settings

60 sec

Control Settings

Network settings

USB media player settings

Function button settings

Display orientation
OSD position

Upper/Right

Landscape

Menu display duration
Menu transparency

Press to display the Setup menu.

Press to select “Control Settings”.

Press the ENTER key to enter Control Settings.

Serial control:

Sets which terminal to use for input for serial communication.
Options: SERIAL IN: SERIAL IN terminal

DIGITAL LINK: DIGITAL LINK terminal

Serial out:

Sets which terminal to use for output for serial communication.
Options: SERIAL OUT: SERIAL OUT terminal

DIGITAL LINK: DIGITAL LINK terminal

Control Settings

Serial control

Serial out

SERIAL OUT

SERIAL IN

IR control

Built-in

IR out

IR OUT

Serial daisy chain position

---

Serial response(ID all)
Serial ID group
Serial response(group)

Off

Note:

When “DIGITAL LINK” is set to “Serial control” or “Serial out”, the power lamp lights orange when the remote

control power is switched “Off” (standby).

IR control:

Sets which terminal to use for remote control signal output.
Options: Built-in: built-in sensor

IR IN: IR IN terminal

DIGITAL LINK: DIGITAL LINK terminal

Summary of Contents for TH-55LFV70U


































































































Search results

Summary of Contents for TH-55LFV70U

Reviews:

Panasonic TH-55LFV70U, Operating Instructions Manual, Page: 60 / 97

Search results

Summary of Contents for TH-55LFV70U

Reviews: