manualshive.com logo in svg

Panasonic TH-55LFV70U, Operating Instructions Manual, Page: 91 / 97

Share
Download
Panasonic TH-55LFV70U Operating Instructions Manual Download Page 91

91

Troubleshooting

Symptoms

Check

It takes a while for the picture to appear.

The unit digitally processes the various signals in order to reproduce esthetically pleasing 

images. As such, it sometimes takes a few moments for the picture to appear when the power 

has been turned on, when the input has been switched.

The edges of the images flicker.

Due to the characteristics of the system used to drive the panel, the edges may appear to flicker 

in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.

There may be red spots, blue spots, green spots and 

black spots on the screen.

This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel 

is built with very high precision technology giving you fine picture details. Occasionally, a few 

non-active pixels may appear on the screen as fixed points of red, blue, green, or black. Please 

note this does not affect the performance of your LCD.

Image retention appears

Image retention may occur. If you display a still picture for an extended period, the image 

might remain on the screen. However, it will disappear after a while. This is not considered 

as malfunction.

Summary of Contents for TH-55LFV70U


































































































Reviews:

No comments