43
SETUP
Colour system
Select Signal from the “Setup” menu during Video input signal mode.
Colour system
Auto
Press to select the “Colour system” .
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level
or noisy input signals the image may in rare cases become
unstable. Should this occur, set the system to match the format
of the input signal.
Colour system:
Set the colour system to match the input signal. When “Auto” is set, Colour system will be automatically
selected from NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N.
To display PAL60 signal, select “Auto”.
Auto
SECAM
NTSC
PAL M
PAL N
NTSC 4.43
PAL
Cinema reality
Cinema reality:
When On, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to Off.
Note:
•
When USB input is selected, this does not operate.
3D Y/C Filter (NTSC)
Colour system
Signal
On
Auto
Cinema reality
Panasonic Auto (4 : 3)
Off
4 : 3
[ AV ]
P-NR
Off
Press to select “Cinema reality”.
Press to set On/Off.
XGA Mode
This menu is displayed when the input signal is analog (Component/PC).
This menu sets three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling
rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
3D Y/C Filter (NTSC)
Colour system
Signal
On
Auto
XGA Mode
Panasonic Auto (4 : 3)
1024 × 768
4 : 3
[ AV ]
P-NR
Off
Press to select “XGA Mode”.
Press to select “1024×768”, “1280×768”, “1366×768”.
Note:
• After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Position” menu as
necessary.
Noise reduction
Reduces picture noise.
3d Y/c Filter (Ntsc)
Color System
Signal
On
Auto
3 : 2 Pulldown
Panasonic Auto (4 : 3)
Off
Normal
[ Video ]
Noise reduction
Off
Block Nr
Mosquito Nr
Off
Off
Refresh Rate
100 Hz
Press to select “Noise reduction”.
Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.
Auto:
Noise reduction will be automatically selected from “Min”,
“Mid” or “Max”.