![background image](http://html.mh-extra.com/html/panasonic/section-700/section-700_user-manual_270161121.webp)
Section 700 - Operation
Chapter 4. Key Telephone Features
DBS-2.3/9.2-700
DBS Manual - Revised April 2000
4-5
Related Programming
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
Version 3.1 or higher)
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
CPC-B Version 3.1 or higher)
• FF6 (Names and Messages): Absence Messages
Considerations
• Calling parties without a display get a busy signal, rather than the Absence
Message.
• If a message code number that has not been programmed is selected,
“Absence,” followed by the code number, appears on the display.
• Absence Message return times can be input as shown in the following
table:
Table 4-2. Example Return Times for Absence Messages
Four-digit numbers can also be input (0000-9999 = Hours & Minutes or
Month & Date).
• When an Absence Message is set on a DID extension, incoming DID calls
are routed according to the ringing assignment programmed for the
incoming trunk.
• In CPC-A and CPC-B Versions prior to 5.0, DND and Absence Messages
cancel Call Forwarding.
Beginning with Version 5.0, calls to an extension with DND or Absence
Message turned on are treated differently, depending on whether they are
trunk or intercom calls: Intercom calls receive busy tone; trunk calls are
routed to the extension defined in permanent call forwarding.
The following types of trunk calls follow permanent call forward settings:
Input
Display
No input
Return
9
Return 9:00
11
Return 11:00
615
Return 6:15
1035
Return 10:35
Summary of Contents for Section 700
