manualshive.com logo in svg

Panasonic Section 700, User Manual

Share
Download
Panasonic Section 700 User Manual Download Page 201

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-85

Related Programming

• FF2 (Trunks): Private Trunk Line

• FF1 (System): Least Cost Routing (LCR) Access

• FF2 (Trunks): Pooled Trunk Access for Group “9”

• FF2 (Trunks): Pooled Trunk Access for Groups “81-86”

• FF3 (Extension): Forced Least Cost Routing

• FF5 (Keys): FF Key Assignment

Considerations

• Calls to Private Lines cause extensions to ring even if the DND or the 

Absence Message feature is activated for them.

• Calls to Private Lines are not forwarded, even if Call Forwarding is 

activated on the associated extensions.

• No warning tone sounds at the Attendant Phone, no matter how long a call 

on a Private Line is on hold, even if the overtime warning tone is ignored.

• When a private line is assigned to an extension, the Toll Restriction 

assignment for the private line changes to “0” for all other extensions. 
Ringing assignments for the private line are also removed from all other 
extensions.

Reminder Call

(All Versions)

Description

Your telephone can act as an alarm clock with the Reminder Call feature.

Operation

To set the Reminder Call feature:

1. Press 

the 

ON/OFF

 key.

• The phone issues intercom dial tone.

Summary of Contents for Section 700











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands