manualshive.com logo in svg

Panasonic Section 700, User Manual

Share
Download
Panasonic Section 700 User Manual Download Page 238

Chapter 5. DSLT Features

Section 700 - Operation

 

5-20

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

The current call is disconnected.

2.  Pick up the handset.

You are automatically connected to the extension sending the Call 
Waiting.

To answer Call Waiting (without disconnecting the current call):

1. Press 

HOLD

.

• The current call is disconnected.

• The new call is connected automatically.

2. Press 

HOLD

 again to retrieve the first call.

Related Programming

• FF1 (System) Extension Class of Service Setting (CPC-AII and CPC-B 

Version 3.1 or higher)

• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and 

CPC-B Version 3.1 or higher)

• FF3 (Extension): Call Waiting/OHVA

Considerations

• Call Waiting can be used without entering a message code.

• An extension that has DND activated, has a call on hold, is ringing (from 

another call), or is engaged in a conference call cannot receive Call 
Waiting messages.

• An extension that has call forwarding activated cannot receive call waiting 

messages unless it has an available ML key.

Summary of Contents for Section 700











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands