manualshive.com logo in svg

Panasonic Section 700, User Manual

Share
Download
Panasonic Section 700 User Manual Download Page 252

Chapter 5. DSLT Features

Section 700 - Operation

 

5-34

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

3.  Replace the handset or press 

ON/OFF.

 

Considerations

• A sixteen-second alarm tone will be issued at the specified time.

• One Reminder Call may be set for each telephone.

• To change the Reminder Call, enter a new time.

• If the extension is in use when the reminder call is scheduled, the reminder 

call is sent as soon as the extension becomes available.

Saved Number Redial

(All Versions)

Description

You can save a previously dialed number for later redialing. Unlike the Last 
Number Redial feature, the Saved Number Redial feature allows you redial 
the stored number, even if it is not the last number dialed.

Saved Number Redial can only be used for outside numbers,.

Operation

To save a number:

1. Press 

the 

AUTO

 key twice.

2. Press 

“*.”

3.  Replace the handset.

To redial a saved number:

1.  Lift the handset. 

2.  Dial a trunk access code (81-86 or 9).

3. Press 

the 

AUTO

 key.

4. Press 

“*.”

Summary of Contents for Section 700











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands