TWIG Bracer
Getting Started Guide
TWIG Bracer is a safety phone with dedicated lone worker alarm functions.
0700
Publication number: YZ6000-01-EN
All rights reserved. © Twig Com Ltd.
RG310 HW made in China
WHAT TO DO FIRST
INSERT SIM CARD
• Insert your SIM card to the upper left SIM holder, put the battery in its place and close the back cover with the
screwdriver included in the sales package. (Note! Only upper left SIM card holder is compatible with TWIG
Bracer application. Lower SIM reader can be used for other phone functionalities.)
START DEVICE
• Start the device by pressing the red
ON/OFF
key.
• When location consent notification appears reply
Agree
. Network-based positioning is not working without it.
• Set up Wi-Fi network by changing
OFF
to
ON
, select the available network and press
Next
.
• When
Congratulations!
is displayed, click
Finish
.
• When
SIM card changed
is displayed, select
Change
. Scroll down and select data connection by
clicking the displayed operator. Press back key of numerical keypad to go back to idle view.
CHECK DATA SETTINGS
• Drag the status bar down to access the notification panel. Use the settings icon in the top right corner to
access system settings. Check the
Data connection
,
GPS
and
Wi-Fi
are switched
on
and
Airplane
mode
is switched
off
.
OPEN DEVICE SETTINGS (password:
1908
)
Select
Settings
, write device settings password in the box below
Please input password
and click login.
VERIFY APN AND ROAMING SETTINGS
• Scroll down and select
More..
>
Mobile networks
>
Access Point Names
• Select
SIM management > Roaming > Data roaming
START TWIG BRACER APPLICATION
• Scroll to right by swiping the display, select
More app
and select Bracer.
