•
H.264(2):
Records video data (H.264(2)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of “H.264(2)” on the [JPEG/H.264] tab of the “Image/Audio” page.
•
Default:
JPEG(1)
IMPORTANT
•
If an SD memory card with an SD Speed Class other than 10 is used,
2992x2992/2816x2816/2048x2048/2560x1920/2560x1440 cannot be selected for the image capture
size of JPEG images. When recording with H.264, set the maximum bit rate to 6144 kbps.
•
If an SD memory card with an SD Speed Class 10 is used and H.264 is used for recording, set the
maximum bit rate to 16384 kbps.
•
For SD memory cards with an SD Speed Class 10, use a card that supports UHS-I (Ultra High
Speed-I).
•
JPEG cannot be recorded when “Quad stream” is selected for “Image capture mode”.
•
JPEG cannot be recorded when “On(NTSC)” or “On(PAL)” is selected for “Monitor out”.
Note
•
When “H.264(1)” is selected, the settings for “H.264(1)” on the [JPEG/H.264] tab of the “Image/
Audio” page will be changed to the settings for “H.264(1) & recording”.
When “H.264(2)” is selected, the settings for “H.264(2)” on the [JPEG/H.264] tab of the “Image/
Audio” page will be changed to the settings for “H.264(2) & recording”.
•
When using the SD memory recording function of a Panasonic network disk recorder, select
“JPEG(1)” for “Recording format” of “Recording stream”.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the settings of the following functions
may be corrected.
–
When “VBR” or “Best effort” is selected for “Transmission priority”, “Frame rate” is set.
–
When “High” or “Middle” is selected for “Burst tolerance level”, “Low” is set.
–
When “2s”, “3s”, “4s” or “5s” is selected for “Refresh interval”, “1s” is set.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the name of the saved file will be
given automatically.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the number of users that can access
the camera may be reduced.
•
When “On” is selected for “Audio recording”, the maximum value of the available bit rate for H.264 will
be limited.
[Save trigger]
Select a trigger to save images on the SD memory card from the following.
•
FTP error:
Saves images when images have failed to transmit to the FTP server by the FTP periodic image
transmission function. Available only for the “JPEG(1)” or “JPEG(2)” images.
•
Alarm input:
Saves images at an alarm occurrence.
•
Manual:
Saves images manually.
•
Schedule:
Saves images in accordance with the settings for “Schedule” (
the “H.264(1)” or “H.264(2)” images.
•
Default:
FTP error
JPEG recording(Manual)
72
Operating Instructions
10 Configure the basic settings of the camera [Basic]
