background image

When using a Panasonic network microphone

These settings are necessary in order to coordinate the network microphone's directivity with the camera
images.

A

B

C

The reference marker position when adjustments are not made with the image rotation gear
Reference marker

The angle adjusted using the image rotation gear

Note

This setting is not required when adjustments are not made with the image rotation gear.

Only use this setting after adjusting the angle with the image rotation gear.

Only use this setting with the sub cover of the camera removed.

* Refer to the installation guide for further information about the image rotation gear and sub cover.

This setting is performed by clicking “Reference marker” in the sub cover.

1.

Click “Reference marker” in the sub cover displayed on the screen.
The angle adjusted using the image rotation gear is displayed.

2.

Click the [Set] button.

The edited settings will be applied.

IMPORTANT

The setting will not be applied unless the [Set] button is clicked.

Operating Instructions

67

10 Configure the basic settings of the camera [Basic]

Summary of Contents for SD XC WV-SFN480





























































































































































































































Reviews: