manualshive.com logo in svg

Panasonic PT-RZ21K, Operating Instructions Manual

Share
Download
Panasonic PT-RZ21K Operating Instructions Manual Download Page 57

Chapter 2

 

Getting Started — Connecting

ENGLISH - 57

Note

 

f

The contrast synchronization function and the shutter synchronization function can be used simultaneously.

 

f

For details on the settings of the contrast synchronization function and the shutter synchronization function, refer to the [PROJECTOR 

SETUP] menu 

→

 [MULTI PROJECTOR SYNC] (

x

 page 169).

 

f

The menu items in the [PROJECTOR SETUP] menu 

→

 [MULTI PROJECTOR SYNC] is the same as the following setting items.

 

g

The [PICTURE] menu 

→

 [DYNAMIC CONTRAST] 

→

 [USER] 

→

 [MULTI PROJECTOR SYNC]

 

g

The [DISPLAY OPTION] menu 

→

 [SHUTTER SETTING] 

→

 [MULTI PROJECTOR SYNC]

 

f

If there are any projectors which you do not want to synchronize within the linked projectors, set [CONTRAST SYNC] and [SHUTTER 

SYNC] to [OFF] individually.

Summary of Contents for PT-RZ21K







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands