Panasonic PT-RZ21K Operating Instructions Manual Download

Page: 16 / 262

16 - ENGLISH

Trademarks

SOLID SHINE is a trademark of Panasonic Corporation.

Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United

States and other countries.

Mac, macOS, and Safari are trademarks of Apple Inc., registered in the United States and other countries.

PJLink

is a registered trademark or pending trademark in Japan, the United States, and other countries and

regions.

DLP is a trademark or registered trademark of Texas Instruments.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.

Crestron Connected

and Fusion RV are trademarks of Crestron Electronics, Inc.

HDBaseT

is a trademark of HDBaseT Alliance.

Art-Net

DisplayPort is a trademark or registered trademark of the Video Electronics Standards Association.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Android and Google Chrome are trademarks of Google LLC.

Adobe, Adobe Flash Player, and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.

in the United States and/or other countries.

RealD 3D is a trademark of RealD Inc.

Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by

Ricoh Company, Ltd.

All other names, company names, and product names mentioned in this manual are trademarks or registered

trademarks of their respective owners.
Please note that the

and

symbols are not specified in this manual.

Illustrations in this manual

Illustrations of the projector, screen, and other parts may vary from the actual product.

Illustrations of the projector with the power cord attached are only examples. The shape of the supplied power

cords varies depending on the country where you purchased the product.

Reference pages

Reference pages in this manual are indicated as (

page 00).

Term

In this manual, the “Wireless/wired remote control unit” accessory is referred to as “Remote control”.

Summary of Contents for PT-RZ21K







































































































































































































































































Search results

Summary of Contents for PT-RZ21K

Reviews:

Related manuals for PT-RZ21K

Brands by name

Popular brands

Panasonic PT-RZ21K, Operating Instructions Manual

Search results

Summary of Contents for PT-RZ21K

Reviews:

Related manuals for PT-RZ21K

Brands by name

Popular brands