Chapter 2
Getting Started — Connecting
ENGLISH - 53
<DVI-D IN> terminal pin assignments and signal names
Outside view
Pin No.
Signal name
Pin No.
Signal name
(17)
(24)
(16)
(9)
(1)
(8)
(1)
T.M.D.S data 2-
(13)
―
(2)
T.M.D.S data 2+
(14)
+5 V
(3)
T.M.D.S data 2/4 shield
(15)
GND
(4)
―
(16)
Hot plug detection
(5)
―
(17)
T.M.D.S data 0
-
(6)
DDC clock
(18)
T.M.D.S data 0+
(7)
DDC data
(19)
T.M.D.S data 0/5 shield
(8)
―
(20)
―
(9)
T.M.D.S data 1-
(21)
―
(10)
T.M.D.S data 1+
(22)
T.M.D.S clock shield
(11)
T.M.D.S data 1/3 shield
(23)
T.M.D.S clock+
(12)
―
(24)
T.M.D.S clock
-
Connecting example: AV equipment
For <HDMI IN>/<DVI-D IN>/<RGB 1 IN> terminals
Blu-ray disc player
VCR (with built-in TBC)
VCR (with built-in TBC)
DVD player with HDMI terminal (HDCP)
Attention
f
Always use one of the following when connecting a VCR.
g
A VCR with built-in time base corrector (TBC)
g
A time base corrector (TBC) between the projector and the VCR
f
If nonstandard burst signals are connected, the image may be distorted. In such a case, connect the time base corrector (TBC) between the
projector and the external devices.
Note
f
Switching of the setting in the [DISPLAY OPTION] menu
→
[DVI-D IN]
→
[EDID SELECT] may be required depending on the connected
external device when DVI-D is input.
f
The <DVI-D IN> terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not be
displayed properly on some devices.
f
For the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. If a cable that does not conform to the HDMI
standards is used, images may be interrupted or may not be displayed.
f
The <HDMI IN> terminal of the projector can be connected to an external device equipped with a DVI-D terminal using an HDMI/DVI
conversion cable. However, this may not function properly for some external devices, and images may not be displayed.
f
The projector does not support VIERA Link (HDMI).
f
It is necessary to switch the setting in the [DISPLAY OPTION] menu
→
[RGB IN]
→
[RGB1 INPUT SETTING] (
x
page 128) when inputting
a video signal and the Y/C signal.
