Chapter 4
Settings — [SECURITY] menu
186 - ENGLISH
4) Press the <ENTER> button.
f
The
[CONTROL PANEL]
screen or the
[REMOTE CONTROL]
screen is displayed.
5) Press
as
to select [CONTROL PANEL] or [REMOTE CONTROL].
6) Press
qw
to switch [USER].
7) Press
as
to select the button item to set.
f
When [INPUT SELECT BUTTON] is selected, press the <ENTER> button, and then press
as
to select
the button to set.
Buttons that can be set
[CONTROL PANEL]
[REMOTE CONTROL]
[POWER BUTTON]
Power standby <
v
> button, power on <
b
> button
[INPUT SELECT BUTTON]
<RGB1> button, <RGB2> button, <DVI-D>
button, <HDMI> button, <DIGITAL LINK> button,
<SDI 1/2> button
<RGB1> button, <RGB2> button, <VIDEO>
button, <S-VIDEO Y/C> button, <DVI-D> button,
<HDMI> button, <DIGITAL LINK> button, <SDI>
button, <INPUT MENU> button
[MENU BUTTON]
<MENU> button
[LENS BUTTON]
<LENS> button
Lens buttons (<FOCUS>, <ZOOM>, <SHIFT>)
[AUTO SETUP BUTTON]
<AUTO SETUP> button
[SHUTTER BUTTON]
<SHUTTER> button
[ASPECT BUTTON]
―
<ASPECT> button
[ON SCREEN BUTTON]
―
<ON SCREEN> button
[OTHER BUTTON]
asqw
, <ENTER> button
Buttons not listed above
8) Press
qw
to switch the item.
[ENABLE]
Enables button operations.
[DISABLE]
Disables button operations.
f
Following items can be selected only when [SDI1/2 BUTTON] or [SDI BUTTON] in [INPUT SELECT
BUTTON] is selected.
[TOGGLE]
Switches between [SDI1] and [SDI2] when the button is operated.
[SDI1]
Fixes to [SDI1].
[SDI2]
Fixes to [SDI2].
[DISABLE]
Disables button operations.
f
Press the <MENU> button to return to the
[CONTROL PANEL]
screen or the
[REMOTE CONTROL]
screen when [INPUT SELECT BUTTON] is selected in Step
7)
.
9) Press
as
to select [APPLY], and press the <ENTER> button.
f
The confirmation screen is displayed.
10) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
When a button operation is performed on the device set to [DISABLE], the
[CONTROL DEVICE PASSWORD]
screen is displayed.
Enter the control device password.
f
The
[CONTROL DEVICE PASSWORD]
screen will disappear when there is no operation for approximately 10 seconds.
f
If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f
When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f
Even when you set button operations on the remote control disabled, operations of the <ID SET> and <ID ALL> buttons on the remote
control are kept enabled.
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press
as
to select [CONTROL DEVICE PASSWORD CHANGE].
2) Press the <ENTER> button.
f
The
[CONTROL DEVICE PASSWORD CHANGE]
screen is displayed.
