Chapter 4
Settings — [NETWORK] menu
178 - ENGLISH
2) Press
qw
to select [ENABLE].
3) Press the <ENTER> button.
f
The
[WIRELESS LAN]
screen is displayed.
4) Press
as
to select [KEY].
5) Press the <ENTER> button.
f
The
[KEY]
screen is displayed.
6) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
The character string that can be registered as the connection key is as follows.
g
8 to 15 single-byte alphanumeric characters
7)
After entering the connection key, press
asqw
to select [OK], and press the <ENTER> button.
8) Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
9) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
The factory default setting of the connection key is “spjcxxxx”. xxxx is the four digit number assigned for each product.
f
Based on the registered connection key, character string in the [NETWORK] menu
→
[NETWORK STATUS]
→
[WIRELESS LAN]
→
[SSID]
is automatically generated.
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required to use a DHCP server.
1) Press
as
to select [PROJECTOR NAME].
2) Press the <ENTER> button.
f
The
[PROJECTOR NAME CHANGE]
screen is displayed.
3) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Up to 16 characters can be entered.
4)
After entering the projector name, press
asqw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
Note
f
The factory default setting of the projector name is “NAMExxxx”. xxxx is the four digit number assigned for each product.
[NETWORK CONTROL]
Set up the control method of the network.
1) Press
as
to select [NETWORK CONTROL].
2) Press the <ENTER> button.
f
The
[NETWORK CONTROL]
screen is displayed.
3) Press
as
to select an item, and press
qw
to change the setting.
[WEB CONTROL]
Set to [ON] to control with the web browser.
[PJLink CONTROL]
Set to [ON] to control with the PJLink protocol.
[PJLink NOTIFICATION]
Set to [ON] to use the PJLink notification function.
f
The
[PJLink NOTIFICATION]
screen is displayed when set to [ON] and the <ENTER> button is
pressed. Set the IP address of the computer to notify the status of the projector in [NOTIFIED IP
ADDRESS 1], [NOTIFIED IP ADDRESS 2].
[COMMAND CONTROL]
Set to [ON] to control with the <SERIAL IN>/<SERIAL OUT> terminal control command format
(
x
page 242). Refer to “Control commands via LAN” (
x
page 235).
[COMMAND PORT]
Set the port number used for command control.
[Crestron Connected(TM)]
Set to [ON] to control with Crestron Connected of Crestron Electronics, Inc.
