Chapter 5
Operations — Web control function
ENGLISH - 167
When [WIRED LAN] is selected
1
2
3
4
5
6
7
8
9
10
11
12
13
11
1 [DHCP ON], [DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a DHCP
server.
5 [DNS1]
Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server address
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
6 [DNS2]
Enter the DNS2 server address.
Available characters for the entry of DNS2 server address
(secondary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.254)
7 [EAP]
Select the EAP set in the RADIUS server.
8 [Back], [Next]
Click the [Back] button to return to the previous screen. When
[EAP] is set to anything other than [NONE], clicking the [Next]
button will advance to next page. When [EAP] is set to [NONE],
clicking the [Next] button will display the screen to confirm the
setting. Click the [Submit] button to update the setting.
9 [USER NAME]
Enter the user name to be used for authentication in single-byte
alphanumeric characters (excluding the space). (Maximum of
64 characters)
10 [PASSWORD]
Enter the password to be used for authentication in single-byte
alphanumeric characters. (Maximum of 64 characters)
11 [Back], [Next]
Click the [Back] button to return to the original screen. Click the
[Next] button to display the setting confirmation screen. Click
the [Submit] button to update the setting.
12 [DIGITAL CERTIFICATE]
Registers the electronic certificate to be used for authentication
(file extension: PFX).
13 [CA CERTIFICATE]
Registers the CA certificate to be used for authentication (file
extension: CER).
Note
f
When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click
[Network config] again since the following operation will not be guaranteed.
f
The connection may be disconnected when the LAN setting is changed while connected with LAN.
When [SIMPLE] (wireless LAN) is selected
1
2
1 [KEY]
Set the key to be used with simple.
Enter 8 to 15 characters of single-byte alphanumeric.
2 [Back], [Next]
Click the [Back] button to return to the previous screen. Click
the [Next] button to display the screen to confirm the setting.
Click the [Submit] button to update the setting.
