Panasonic PT-MZ770 Operating Instructions (Functional Manual) Download

Page: 71 / 233

Chapter 3

Basic Operations — Using the USB memory

ENGLISH - 71

Removing the USB memory

Remove the USB memory after confirming that the indicator on the USB memory is not blinking.

Attention

The blinking of the indicator of the USB memory attached to the projector is indicating that the projector is accessing (reading or writing) the

USB memory. Do not remove the USB memory from the projector when the indicator is blinking.

The access status to the USB memory cannot be confirmed when a USB memory without the monitoring function such as indicator is used.

In such case, remove the USB memory after waiting for one of following is completed.

Turn off the projector.

When using the Memory Viewer function, switch the input to anything other than the MEMORY VIEWER input.

When using the pairing function, wait until the pairing data write completion message is displayed on the standby screen.

Summary of Contents for PT-MZ770










































































































































































































































Search results

Summary of Contents for PT-MZ770

Reviews:

Related manuals for PT-MZ770

Brands by name

Popular brands

Panasonic PT-MZ770, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-MZ770

Reviews:

Related manuals for PT-MZ770

Brands by name

Popular brands