![background image](http://html.mh-extra.com/html/panasonic/panafax-uf-7000/panafax-uf-7000_service-handbook_257253090.webp)
90
UF-7000/8000
NOV 2004
Ver. 2.0
UF-7100/8100
4.2.5.
Fax Service Mode 4 (Modem Test)
4.2.5.1.
Binary Signal
This Service Mode is used to check the binary signal output. Signals can be output to the line using the
following procedure.
Press the “V”, ”/\” arrow keys to select the "4: MODEM Test" on the display.
↓
Press the “SET” key.
↓
Press the “V”, ”/\” arrow keys select the "1: LINE-1".
↓
Press the “SET” key to select the "1: Signal Test".
↓
Press the “SET” key.
↓
Press the desired number.
↓
Press the “SET” key.
↓
Press the “STOP” key twice to exit the service mode.
Binary Signal Table
Number
Signals
1
V21 300bps
2
V27ter 2400bps
3
V27ter 4800bps
4
V29 7200bps
5
V29 9600bps
6
V17 TC7200bps
7
V17 TC9600bps
8
V17 12000bps
9
V17 14400bps