Panasonic Panafax UF-7000 Service Handbook Download

Page: 14 / 187

UF-7100/8100

NOV 2004

Ver. 2.0

UF-7000/8000

Reception Features

1 Substitute Reception

Yes

2 Fixed Reduction

Yes

LTR/A4/LGL: 70 - 100%
(in 1% Steps), Top & Left
Alignment

3 Auto Reduction

Yes

LTR/A4/LGL: 70 - 100%
(in 1% Steps), Top & Left
Alignment

4 Overlap Printing

Yes

Page End Approx. 0.51 in (13
mm)

5 Receive to Memory

Yes

6 Distinctive Ring Detector

(DRD)

Yes

Specified Destinations only

7 90 Degree Rotation

Reception

8 Duplex Printing

Yes

Polling

1 Polling

Yes

2 Turnaround Polling

3 Multi-Station Polling

Yes

4 Deferred Polling

Yes

5 Deferred Multi-Station

Polling

Yes

6 Direct Polling Tx

7 Memory Polling Tx

Yes

1 File

8 Preset Polling Password

Yes

9 Temporary Polling

Password

Yes

10 Continuous Polling

Yes

Convenience

1 Panel Display

Yes

2 Voice Contact

3 Edit File Mode

Yes

With View Mode

4 Incomplete File Save

Yes

With View Mode

5 Automatic Fax Cover Sheet

Yes

Items

Description

Remarks

UF-7000/7100

UF-8000/8100

Summary of Contents for Panafax UF-7000




























































































































































































Search results

Summary of Contents for Panafax UF-7000

Reviews:

Related manuals for Panafax UF-7000

Brands by name

Popular brands

Panasonic Panafax UF-7000, Service Handbook

Search results

Summary of Contents for Panafax UF-7000

Reviews:

Related manuals for Panafax UF-7000

Brands by name

Popular brands