![background image](http://html.mh-extra.com/html/panasonic/panafax-uf-7000/panafax-uf-7000_service-handbook_257253065.webp)
65
UF-7000/8000
NOV 2004
Ver. 2.0
UF-7100/8100
4.1.5.
F6 Mode: Adjust Parameters (For Copier)
Set the machine to Service Mode and press "6" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
Note:
1. The Factory Setting is different in each model.
2. To change the input value +/-, press “<“, “>” cursor keys.
3. The machine may accept a (+/-) input value that exceeds the specified Setting Range for the
parameters in the table; however, the actual registered value will not exceed the Upper/Lower
Limitation value.
F6 Mode
No.
Item
Remarks
Setting
Range
00-03 Not Used
04
Printer Registration
Delay time is adjusted from registration roller
clutch ON.
-50 - +16
0.5mm
05-06 Not Used
07
Registration Void
Registration void should be adjusted.
0 - +99
0.5mm
08
Not Used
09
Trail Edge PRT Tim.
Adjustment of trail edge void.
-9 - +15
0.5mm
10
Side Adjust (Bypass)
Adjustment of LSU side-side (Sheet Bypass).
-8 - +7
0.5mm
11
Side Adjust (Tray 1)
Adjustment of LSU side-side (1st Tray).
-8 - +7
0.5mm
12
Side Adjust (Tray 2)
Adjustment of LSU side-side (2nd Tray).
-8 - +7
0.5mm
13-15 Not Used
16
Side Adjust (ADU)
Adjustment of LSU side-side (ADU).
-8 - +7
0.5mm
17-38 Not Used
39
LSU Unit PWM Adjust
Adjustment of PWM value of LSU.
-32 - +32
40
Trans Current Side 1
Adjustment of Transfer Current.
-77 - +76
0.15uA