manualshive.com logo in svg

Panasonic Panafax UF-7000, Service Handbook

Share
Download
Panasonic Panafax UF-7000 Service Handbook Download Page 27

27

UF-7000/8000

NOV 2004

Ver. 2.0

UF-7100/8100

2.2.

Required Tools

2.2.1.

Preventive Maintenance Method

No.

Tools

No.

Tools

1

Soft Cloth

7

Pliers

2

Isopropyl Alcohol

8

Cotton Swab

3

Phillips Screwdriver (#2)

9

Brush

4

Stubby Phillips Screwdriver (#2)

10

KS-660 - Conductive Grease
(Available from Shin-Etsu Silicones of America, Inc.  
URL: 

http://www.shinetsusilicones.com

) 

5

Slotted Screwdriver (3/32 in)

11

Molykote EM-50L Grease 
(Available from Dow Corning, 
URL: 

http://www.dowcorning.com

)

6

Tweezer

No.

Part Description

Important 

Action

Comments

1

Memory Data

Check

1. Print the RAM DATA for reference and as a precaution.
2. After completing the task(s), print and compare the RAM 

DATA with the previously printed one.

2

Auto Document 
Feeder (ADF)

Check & 
Clean

1. Clean the Rollers with Wet soft cloth (Water).

Note:

For stubborn toner accumulation, wipe with a soft cloth 
saturated with Isopropyl Alcohol first, then follow up with 
a soft cloth saturated with water.

3

Scanner Unit

Check & 
Clean

1. Clean the Scanning Glass or White Reference Sheet with 

Isopropyl Alcohol when required.

2. Clean it with Wet soft cloth.

4

Transmitter Unit

Check & 
Clean

1. Remove any foreign obstacles.
2. Clean the Rollers with Wet soft cloth (Water).

5

Inspection Items

Check

1. Check the Harnesses.
2. Check the Connectors.
3. Check the Screws. If required, replace consumable parts.

6

Gears, Rollers Shafts Check & 

Grease

1. Check and grease the required Gears and Shafts.

7

Timing Belts

Check & 
Clean

1. Check for belt looseness or abrasion.
2. Adjust the Idle Pulley.

Summary of Contents for Panafax UF-7000




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands