![background image](http://html.mh-extra.com/html/panasonic/panafax-uf-7000/panafax-uf-7000_service-handbook_257253043.webp)
43
UF-7000/8000
NOV 2004
Ver. 2.0
UF-7100/8100
3.1.2.
Jam Error Codes (J Code)
Section
Jam Location
A
ADF
B
Paper Transport / Exit Area
C
Paper Entry Area
Jam Error Codes (J Codes) Table
Code
Contents
Section
J00
The Registration Sensor did not detect paper within a predetermined time after paper
started feeding. (Sheet Bypass)
C
J01
The Registration Sensor did not detect paper within a predetermined time after the
Paper Feed Roller started rotating. (1st Feeder Unit)
J02
The Registration Sensor does not detect paper within a predetermined time after the
Paper Feed Roller started rotating. (2nd Feeder Unit)
J43
Paper Jam in the Registration Sensor or Paper Path Sensor.
B, C
J44
Paper Jam in the Paper Exit / ADU Paper Jam Sensor.
J71
Original was longer than 78.7 in (2m).
(Information Code 031 or 032 is printed on the Transaction Journal instead.)
A
J72
Read Point Sensor does not go ON within 10 seconds after the original starts feeding.
(Information Code 030 is printed on the Transaction Journal instead.)
J74
The Exit Sensor does not go ON within a predetermined time after the Sensor is
activated.
J75
The Exit Sensor does not go OFF within a predetermined time after the Sensor is
activated.
J80
The Automatic Duplex Unit (ADU) Entrance Sensor does not detect paper within a
predetermined time.
C
J82
The ADU Exit Sensor does not detect paper within a predetermined time after ADU
Middle Sensor is activated.
J83
The ADU Entrance Sensor keeps detecting paper after a predetermined time has
lapsed.
J92
The Original was pulled out when feeding an original.
A
J93
The Original remained in the ADF.
J94
The ADF does not go off after the predetermined time.
Unexpected Jam timing (i.e. Original is too short, etc.)
A
B
C