![background image](http://html.mh-extra.com/html/panasonic/panafax-uf-7000/panafax-uf-7000_service-handbook_257253054.webp)
54
UF-7000/8000
NOV 2004
Ver. 2.0
UF-7100/8100
4 Service Modes
4.1.
Service Modes (For Copier)
These Service Modes are provided to assist the technician in checking for abnormalities in the copier and a
means of making adjustments to the Input/Output of major components.
Caution:
The factory default parameters are preset (country dependent) for optimum performance and in
compliance with the local telecommunication regulations/standards, and do not need to be changed.
Changing some of these parameters may cause the unit to be no longer compliant or become
inoperable.
4.1.1.
Service Mode Procedure
1. To select the Service Mode
The service mode is selected when “FUNCTION”, “ORIGINAL SIZE” and “3” keys are sequentially
pressed, then F1 will appear in the display.
2. To exit the Service Mode
The service mode is reset when the “FUNCTION” and “CLEAR” keys are pressed sequentially.
4.1.2.
Copier Service Mode Functions
Service Modes (For Copier)
Service
Mode
Item
Function
F1
Self Test
00 Scanner LED Test
This test is used for checking the
Scanner LED.
01 LCD/LED Test
This test is used for checking the LCD
and LEDs.
02 Page Memory Test
This test is used for checking the Page
Memory.
03 Print Test Pattern 1
Prints the pattern for setting the Paper
position alignment.
04 Print Test Pattern 2
Prints the Slant pattern for setting the
Paper position alignment.
05 Print Test Pattern 3
Prints the Grid pattern for setting the
Paper position alignment.
06 Print Test Pattern 4
Prints the pattern for setting the Duplex
Paper position alignment.
F2
Single Copy Test
One sheet is copied when the Start key
is pressed.
F3
Continuous Copy Test
Multi copies are made when the Start
key is pressed.
F4
Input / Output Status Test
The functioning of Input / Output items
(selected item numbers) is checked.
F5
Function Parameters
Various function settings (selected by
code numbers) can be changed.
F6
Adjust Parameters
Various function settings (selected by
code numbers) can be adjusted.
F7
Electronic Counter
Electronic Counters for Maintenance
F8
Service Adjustment
Perform pseudo-operation of an item
(selected by code numbers)