Panasonic Panafax UF-7000 Service Handbook Download

Page: 69 / 187

UF-7000/8000

NOV 2004

Ver. 2.0

UF-7100/8100

4.1.8.

F9 Mode: Unit Maintenance

Set the machine to Service Mode and press "9" key on the Keypad.

↓

Press the "START" key.

↓

Enter the desired code number or press “V”, ”/\” arrow keys.

↓

If you wish to select another code number, scroll the menu with the arrow keys.

↓

Press the "SET" key.

↓

Enter the desired function code number and press “SET” key.

↓

When the “CLEAR” key is pressed, the selected code input will not be accepted.

↓

Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.

↓

Reboot the machine after setting the parameter(s) to activate the setting(s).

F9 Mode

Service

Mode

Item

Remarks

Unit
Maintenance

00 Fax Function Parameter
01 Service Alert Tel #

Displays the contact number when a
machine malfunction occurs.

02 Firmware

Version

00 SC

Displays the firmware version for SC.

01 SC Boot

Displays the firmware version for SC
Boot.

02 PNL

Displays the firmware version for PNL.

03 Scanner

Displays the firmware version for SDR.

04 Printer

Displays the firmware version.

05 FAX Modem

Displays the firmware version for FAX.

06 G3B Board

Displays the firmware version for G3B.

07 SC2

Displays the firmware version for Slot 1.

03 Print

Device Info.

00 F5/F6 Parameters

Prints the memory contents of the F5
and F6 modes.

01 Machine Information Prints the machine setup information list.
02 Counter Information Prints the Counter information list.
03 System Address

Info.

Prints the system memory setting.

04 RAM Address

Information

Prints the RAM data dump list.

04 RAM Edit

Mode

1 Relative Address

Setting of Relative address.

2 Absolute Address

Setting of Real address.

05 Serial Number

Registration of Serial Number for
Maintenance.
Clears with Shipment Set.

Summary of Contents for Panafax UF-7000




























































































































































































Search results

Summary of Contents for Panafax UF-7000

Reviews:

Related manuals for Panafax UF-7000

Brands by name

Popular brands

Panasonic Panafax UF-7000, Service Handbook

Search results

Summary of Contents for Panafax UF-7000

Reviews:

Related manuals for Panafax UF-7000

Brands by name

Popular brands