Panasonic Panafax UF-7000 Service Handbook Download

Page: 100 / 187

100

UF-7000/8000

NOV 2004

Ver. 2.0

UF-7100/8100

4.2.8.

Service Mode 9 (System Maintenance)

4.2.8.1.

Overview

This Service Mode is used to maintain the machine. Use the following procedure for System Maintenance.

Press the “V”, ”/\” arrow keys to select the "9: System Maintenance" on the display.

↓

Press the “SET” key to select the "8: Send RCV’D File". The display changes to the Fax Mode.

↓

Select the desired Fax number.

↓

Press "START" to send the Fax.
After the transmission, the machine returns to the Stand-by Mode.

Note:

If there is NO File in the machine, this operation will not function.
Press the “STOP” key twice to exit the service mode.

System Maintenance Table

No.

Maintenance Mode

Description

Send RCV'D File

Transfers documents from memory to another fax machine
during a fatal printer error.

Summary of Contents for Panafax UF-7000




























































































































































































Search results

Summary of Contents for Panafax UF-7000

Reviews:

Related manuals for Panafax UF-7000

Brands by name

Popular brands

Panasonic Panafax UF-7000, Service Handbook

Search results

Summary of Contents for Panafax UF-7000

Reviews:

Related manuals for Panafax UF-7000

Brands by name

Popular brands