29
UF-7000/8000
NOV 2004
Ver. 2.0
UF-7100/8100
2.4.
Preventive Maintenance Check List
The chart outlined below is a general guideline for maintenance. The list is for an average usage of 50
transmitted and received documents per day. Needless to say, the environmental conditions and actual use
will vary these factors. The chart below is for reference only.
Note:
1. Wet Cloth represents a soft cloth saturated with water.
For stubborn toner accumulation, wipe with a soft cloth saturated with Isopropyl Alcohol first, then
follow up with a soft cloth saturated with water.
2. The Maintenance Cycle is based on the Counter Information for each individual module.
To verify the counter information, print the Total Counter List using the Service Mode: F7 - Electronic
Counter - 00 (List Print).
3. Cleaning, Replacement and Adjustment Cycle (Sheet) are based on using Panasonic's recommended
standard paper and supplies. These cycles may vary with the kind of paper used, Paper size,
orientation, print duty, continuous/interval print and/or ambient conditions.
No.
Preventive
Maintenance
Parts
Ref.
No.
Cleaning
Replacement/Adjustment
Ref.
Counter
Cycle
(Sheet)
Method
Cycle
(Sheet)
Procedure
ADF Unit
1 Pick Up Roller
416
10K
Wet soft cloth
85K
Refer to
2.2.1. of the
Service
Manual
F7-08
2 Feed Roller
419
10K
Wet soft cloth
85K
3 Separation Roller
403
10K
Wet soft cloth
85K
4 ADF Pad
401
10K
Dry soft cloth
-
Paper Feed Module
5 Pick Up Roller
1416
10K
Wet soft cloth
85K
Refer to
2.2.8. of the
Service
Manual
F7-12
6 Separation Pad
1715
10K
Wet soft cloth
85K
7
Bias Transfer Roller
(BTR)
1603
10K
Dry soft cloth
85K
Refer to
2.2.9. of the
Service
Manual
2nd Paper Feed Module
8 Pick Up Roller
1833
10K
Wet soft cloth
85K
Refer to
2.2.11. of the
Service
Manual
F7-13
9 Separation Pad
1912
10K
Wet soft cloth
85K
Fuser Unit
10 Fuser Unit
1330
-
-
85K
Refer to
2.2.7. of the
Service
Manual
F7-02
