Panasonic Electric Works Nordic AB
MEW01351
Rev: -
Planning Instructions Fire alarm system EBL512 G3, V1.1.x
70
12.2
Control unit outputs R0 & R1
Each control unit has two programmable relay outputs:
R0
Relay output, NO or NC contacts programmable
R1
Relay output, NO or NC contacts programmable
Connections and more information, see dwg. 512 G3 - 23.
12.3
8 relays expansion board 4581 Output 0
–
Output 7
Each 4581 board has eight programmable relay outputs:
Output 0
Relay output, NO or NC contacts programmable
Output 1
Relay output, NO or NC contacts programmable
Output 2
Relay output, NO or NC contacts programmable
Output 3
Relay output, NO or NC contacts programmable
Output 4
Relay output, NO or NC contacts programmable
Output 5
Relay output, NO or NC contacts programmable
Output 6
Relay output, NO or NC contacts programmable
Output 7
Relay output, NO or NC contacts programmable
Relay contact ratings: Max. 2A @ 30 V DC.
Connections and more information, see dwg. 512 G3 – 34.
12.4
Inputs and Outputs expansion board 4583
Output 0 & Output 1
Expansion board 4583 has two programmable, supervised
(monitored)
57
voltage outputs:
Output 0
Supervised (monitored) voltage output, 24V DC
58
, max.
200 mA (Fuse F1).
Output 1
Supervised (monitored) voltage output, 24V DC
58
, max.
200 mA (Fuse F2).
Connections and more information, see drawing 512 G3 – 35, sheet 1.
See also chapter "Inputs and outputs expansion board 4583", page 30.
12.5
The 3361 unit's Outputs Re0 & Re1
Each 3361 unit has two programmable relay outputs:
Re0
Relay output, NO or NC contacts programmable
Re1
Relay output, NO or NC contacts programmable
Connections and more information, see dwg. 512 G3 – 36.
57
This is default, but via WinG3 it is possible to set each output individually
as not supervised (not monitored). A normally high output is not supervised.
See also chapter "Calibration of supervised outputs", page 108.
58
See chapter "Technical data", page 157, regarding
system voltage
.
