№
SX-DCT00221 -
6-
Panasonic Corporation
5.3 Connector for motor connection (MOTOR)
MOLEX 5569-8A-1210 or equivalent
Terminal number Terminal name
Description of terminal
1
U
Motor U phase
2
V
Motor V phase
3
W
Motor W phase
4
5VS
5 V (not insulated from power supply)
5
CS1
CS signal
6
CS2
CS signal
7
CS3
CS signal
8
GNDS
GND (not insulated from power supply)
■
High voltage is applied to motor wire and CS signal line; Use caution for avoiding
electric shock.
■
Use a motor extension cable (option) for extending motor wire.
■
No. 4 to 8 terminals of option cable are shielded. But the shield material is
not grounded.
Please do not ground the shield material in order to avoid malfunctions or
damages.
■
No. 4 to 8 terminals of option cable are not isolated from commercial power
source. Use care to avoid electric shock and grounding fault.
5.4 Connector for communications (SER)
MOLEX 85503
－
0001 or equivalent
Terminal number Terminal name
Description of terminal
1
－
Do not connect anything.
2
+5VL
power supply 5 V
3
SOT
Digital key pad communication
or PANATERM
for BL
4
SIN
5
RS485+
Connect RS485+
6
RS485-
Connect RS485-
7
GNDL
Signal ground
8
SCK
Digital key pad communication
■
The pin numbers are shown in the figure at right.
■
The connection cable(DV0P383**) for Digital key pad is needed to connect
with the Digital key pad. (sold separately)
■
The connection cable(DV0P383**) for Digital key and PC cable (DV0P4140)
are needed to use RS232C communication control software
「
PANATERM for BL
」
.
１
８
