№
SX-DCT00221 -
69-
Panasonic Corporation
16. Other remarks
16.1
Operating a brushless motor or brushless amplifier increases the leakage current and may
cause unnecessary operation of the earth leakage breaker. In that case, please use self-system
and other-system earth leakage breaker with harmonic countermeasure applied.
16.2
During operation, radio noise may be generated from input / output lines, brushless motors,
brushless amplifiers, etc., which may affect electronic devices.
In that case, it can be sup-
pressed to some extent by installing a noise filter at the input or by placing the electric wire in-
side the conduit.
16.3
This product is designed for general industrial products etc. Do not use it in nuclear power con-
trol, aerospace equipment, transportation equipment, medical equipment, various safety de-
vices, devices requiring cleanliness such as human life related equipment, special environment.
16.4
If this product is operated in a state where the shaft is not electrically grounded, such as driving
a fan, electrolytic corrosion of the motor bearing may occur depending on the actual machine
and the installation environment, so bearings sound may become high, so please check and
verify.
16.5
Precautions for exporting this product and equipment incorporating this product
If the end user or end use of this product is concerned with military or weapons etc., it may be
subject to export restrictions prescribed by the "Foreign Exchange and Foreign Trade Control
Law". When exporting, please take the examination and necessary export procedures. Please
note the matching with our products when changing the specifications of your machine.
16.6
Please confirm the following in the finished equipment.
· Conformity of standards, laws and regulations
· Matching of structure, dimensions, lifetime and characteristics with finished equipment.
16.7
It is conceivable that the final equipment malfunctions due to malfunction of this product
due to signal disconnection or signal loss, or abnormal operation of this product due to ex-
ternal noise / static electricity application.
Please design failsafe to prevent it. Also ensure
the safety within the operable range at the operating location.
16.8
Depending on the malfunction of this product, there is a possibility of smoking.
Please be careful when used in a clean room etc.
16.9
There is a possibility that noise resistance performance may be influenced by the wiring
condition such as earth grounding method, cable length, shielding condition of signal line,
so please check noise resistance even with the final equipment.
16.10
Do not use benzine, thinner, alcohol, acidic or alkaline detergent as it may discolor or break
the exterior case.
16.11
Please contact us beforehand with items that need to be arranged in items not described in
this specification.
16.12
When a problem occurs, we will respond after consultation based on the items described in
this specification.
16.13
Please do not remove the nameplate.
16.14
After arrival, please confirm whether the actual item is as ordered.
16.15
To the extent that this specification is satisfied, parts may be partially changed for perfor-
mance improvement etc.
16.16
Specification change shall be made in our delivery specifications or documents specified by
your company, and we will change the specification after confirmation by prototype if there
is an effect on function / characteristics etc.
16.17
Prices may change if there is a change in specifications.
16.18
Please consider the tightening torque of the installation screw of the product appropriately
so as not to loosen or break, considering the strength of the screw to be used and the mate-
rial of the installation destination.
