Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 162

Page: 162 / 343

162

Stabiliser, Zoom and Flash

Taking pictures with flash

When the interchangeable lens (H-FS1442A) is used

Wide

Tele

0.8 m (2.6 feet) to 4.8 m (16 feet)

0.3 m (0.98 feet) to 3.0 m (9.8 feet)

When the interchangeable lens (H-H020A) is used

0.5 m (1.6 feet) to 9.8 m (32 feet)

When the interchangeable lens (H-FS14140) is used

(When the aspect ratio is [4:3])

Wide to 34 mm

35 mm

Tele

Vignetting effect occurs due to

the light of the flash.

0.8 m (2.6 feet)

to 3.7 m (12 feet)

0.5 m (1.6 feet)

to 3.0 m (9.8 feet)

•These ranges are obtained, the ISO sensitivity is set to [AUTO], and [ISO Auto Upper

Limit (Photo)] is set to [AUTO].

Using the flash skilfully

When taking pictures with flash with the lens hood attached, the lower portion of the photo may turn

dark and the control of the flash may be disabled because the photo flash may be obscured by the

lens hood. We recommend detaching the lens hood.

●

Avoid doing the following, as the heat or light could cause deformation or discolouration.

•Putting the flash close to objects

•Covering the flash with your hand as it is firing

•Closing the flash as it is firing

●

Do not close the flash immediately after the preliminary flash is operated prior to taking pictures for

Forced ON/Red-Eye Reduction and other flash settings. If you close the flash immediately, it will

cause a malfunction.

●

Flash charging may take time if battery is low or if using flash repeatedly. When the flash is being

charged, the flash icon flashes red, and you cannot take a picture even when you fully press the

shutter button.

●

When an External Flash is attached, it will have priority over the built-in flash. For information

about external flash, refer to

(→

313)

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 162 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: