Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 212

Page: 212 / 343

212

Using Menu Functions

Menu list

→

[Custom

] →

[Focus / Release Shutter]

[MF Assist]

Sets the display method of MF Assist (enlarged screen).

•Available settings vary depending on the lens used.

When an interchangeable lens having a focus ring (H-FS35100/H-FS12060/

H-FS1442A/H-H020A/H-FS14140) is used

The screen is enlarged by operating the lens or by pressing [ ] button ( ).

The screen is enlarged by operating the lens.

The screen is enlarged by pressing [ ] button ( ).

[OFF]

The screen is not be enlarged.

When an interchangeable lens with no focus ring (H-FS12032) is used

Settings: [ON] / [OFF]

●

MF Assist is not displayed in the following cases:

•During motion picture recording

•When recording with [ ] ([4K Pre-Burst]) of the 4K Photo function

•When using the Digital Zoom

[MF Assist Display]

Sets whether to display the MF Assist (enlarged screen) in a window or full screen.

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 212 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: