Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 44

Page: 44 / 343

Basics

The monitor and viewfinder can be rotated to suit your needs. This is convenient as it

allows you to take pictures from various angles by adjusting the monitor and viewfinder.

■

Adjusting the angle of the monitor

■

Adjusting the angle of the viewfinder

Free angle shooting

Taking pictures at high angle

Taking pictures at low angle

●

Be careful not to catch your finger, etc. in the monitor or viewfinder.

●

When adjusting the angle of the monitor and viewfinder, be careful not to apply too much

force. Doing so may cause damage or malfunction.

●

When not using this camera, close the monitor and viewfinder completely back to the original

position.

●

Before attaching a tripod or unipod, close the monitor back to the original position.

●

Depending on the tripod or unipod being used, the maximum angle to which the monitor can be

adjusted will be limited.

●

Use of an external flash (optional) will limit the maximum angle to which the viewfinder can be

adjusted.

Adjusting the angle of the monitor and viewfinder

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 44 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: