Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 113

Page: 113 / 343

113

Focus, Brightness (Exposure) and Colour tone Settings

Taking pictures with Exposure Compensation

●

In Manual Exposure Mode, you can correct the exposure only when the ISO sensitivity is set to

[AUTO].

●

Settings can be made within a range of –3 EV to +3 EV while recording motion pictures, recording

4K photos, or recording in [Post Focus].

●

When [Auto Exposure Comp.] of [Flash] in the [Rec] menu is set to [ON], the flash output is also

automatically adjusted based on the exposure compensation value.

●

Depending on the brightness, this may not be possible in some cases.

●

When the Exposure Compensation value is out of the –3 EV to +3 EV range, the brightness of

the recording screen will no longer change. You can apply the exposure compensation value by

pressing the shutter button halfway or pressing the [AF/AE LOCK] button to lock exposure.

●

The set Exposure Compensation value is stored even if the camera is turned off. (When [Exposure

Comp. Reset] is set to [OFF])

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 113 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: