233
Using Menu Functions
Menu list
→
[Setup]
[Pixel Refresh]
It will perform optimisation of imaging device and image processing.
●
Imaging device and image processing is optimised when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
●
Turn the camera off and on after the pixels are corrected.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to the front of the imaging
device is performed.
●
Dust Reduction Function will operate automatically when the camera is turned on, but you can use
this function when you see dust.
[Level Gauge Adjust.]
■
[Adjust.]
Hold the camera in a horizontal position, and press [MENU/SET]. The level gauge will be
adjusted.
■
[Level Gauge Value Reset]
Restores the default level gauge setting.
[Demo Mode]
You can try focusing, peaking, etc. in [Post Focus], with the image picture.