Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 327

Page: 327 / 343

327

Others

Q&A Troubleshooting

■

Motion Picture

Cannot record motion pictures.

•When a large capacity card is used, you may not be able to take a picture for a while after you turn

on the camera.

Motion picture recording stops midway.

•When the ambient temperature is high or motion picture is recorded continuously, the camera may

display [ ] and stop the recording. Wait until the camera cools down.

•The speed class of a required card varies depending on [Rec Format] and [Rec Quality] of a motion

picture. Be sure to use a card of the recommended speed class

(→

33)

Sometimes focus adjustment with Auto Focus mode is difficult while recording 4K motion

pictures.

•This may occur when taking a picture by reducing the Auto Focus speed in order to adjust the

focus at high precision. This is not a malfunction.

A noise, such as a clicking or buzzing noise, is recorded on a motion picture. Audio is

recorded at low volumes.

•When recording in a quiet environment, the sound of aperture, focus and other actions may be

recorded in motion pictures depending on the lens used. This is not a malfunction. The focus

operation during recording of motion pictures can be set to [OFF] in [Continuous AF]

(→

175)

•If you block the microphone with your fingers while motion pictures are being recorded, the audio

may be recorded at a low volume or may not be recorded at all. In this case, the camera may pick

up the lens operating sounds more easily.

Operating sounds are recorded in a motion picture.

•We recommend recording motion pictures in Creative Video Mode if you are concerned about

operating noise.

(→

89)

■

Lens

When the lens is attached to another digital camera, manual focus operation cannot be

performed.

•You can use Manual Focus with the interchangeable lens (H-FS12032) only if your model is

compatible with the lens.

Refer to the support website below for details:

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 327 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: