Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 195

Page: 195 / 343

195

Using Menu Functions

Menu list

●

[Rough Monochrome], [Silky Monochrome], [Soft Focus], [Star Filter] and [Sunshine] are not

available in the following cases.

•Creative Video Mode

•During motion picture recording

●

The following functions are not available in Panorama Shot Mode.

– [Toy Effect], [Toy Pop], [Miniature Effect], [Sunshine]

●

When recording panorama pictures, the following effects are not applied to the recording screen.

– [Rough Monochrome], [Silky Monochrome], [Soft Focus], [Star Filter]

●

When recording a panorama picture in a scene with low brightness, you may not be able to

achieve the desired results if [High Key] is used in the Panorama Shot Mode.

●

The available ISO sensitivity settings will be limited up to [3200].

●

The ISO sensitivity for [High Dynamic] will be fixed to [AUTO].

●

When using [Filter Effect], you cannot use menus or recording functions which are not available in

Creative Control Mode.

●

This function is not available in the following case:

•When recording using [4K Live Cropping]

■

Taking two still pictures with and without picture effects

([Simultaneous Record w/o Filter])

You can take two still pictures at the same time by pressing the shutter button once; one

with effects and one without effects.

→

[Rec

] → [

Filter Settings

] → [

Simultaneous Record w/o Filter]

Settings: [ON] / [OFF]

•The camera will take a still picture with the effects applied and then a still picture

without the effects.

•After taking the picture, [Auto Review] will display only the still picture with the effects

applied.

●

This function is not available in the following cases:

•Panorama Shot Mode

•When using [Burst]

•When recording 4K photos

•When recording using [Post Focus]

•Taking still pictures while a motion picture is being recorded (only when [ ] ([Video Priority]) is

set)

•When [Quality] is set to [

], [

] or [ ]

•When recording using [Bracket]

•When using [Time Lapse Shot]

•When using [Stop Motion Animation]

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 195 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: