manualshive.com logo in svg

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 209 / 343

Share
Download
Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 209

209

Using Menu Functions

Menu list

 → 

 [Custom

] → 

 [Focus / Release Shutter]

[Eye Sensor AF]

Adjusts the focus automatically when the eye sensor is activated.

 

●

[Eye Sensor AF] may not work when the lighting is low.

[Pinpoint AF Setting]

[Pinpoint AF Time]

Sets the time for which the screen is enlarged when the shutter button is 

pressed halfway with Auto Focus Mode set to [   ].

[Pinpoint AF Display]

Sets whether to display the enlarged screen that appears when Auto 

Focus Mode is set to [   ] in a window or full screen.

[AF Assist Lamp]

Illuminates the AF Assist Lamp when the shutter button is pressed halfway when it is too 

dark to facilitate focusing.

 

●

The effective range of the AF Assist Lamp is different depending on the lens used.

 •When the interchangeable lens (H-FS12032) is attached and at Wide:  

Approx. 1.0 m (3.3 feet) to 3.0 m (9.8 feet)

 •When the interchangeable lens (H-FS35100) is attached and at Wide:  

Approx. 1.0 m (3.3 feet) to 3.0 m (9.8 feet)

 •When the interchangeable lens (H-FS12060) is attached and at Wide:  

Approx. 1.0 m (3.3 feet) to 3.0 m (9.8 feet)

 •When the interchangeable lens (H-FS1442A) is attached and at Wide:  

Approx. 1.0 m (3.3 feet) to 3.0 m (9.8 feet)

 •When the interchangeable lens (H-H020A) is attached:  

Approx. 1.0 m (3.3 feet) to 5.0 m (16 feet)

 •When the interchangeable lens (H-FS14140) is attached and at Wide:  

Approx. 1.0 m (3.3 feet) to 3.0 m (9.8 feet)

 

●

Remove the lens hood.

 

●

The AF Assist Lamp gets slightly blocked when the interchangeable lens (H-FS12032/H-FS35100/

H-FS12060/H-FS1442A/H-H020A/H-FS14140) is used, but it does not affect the performance.

 

●

The AF Assist Lamp may be greatly blocked, and it may become harder to focus when a lens with 

large diameter is used.

 

●

The setting is fixed to [OFF] in the following cases:

 •[Distinct Scenery], [Bright Blue Sky], [Romantic Sunset Glow], [Vivid Sunset Glow], [Glistening 

Water], [Clear Nightscape], [Cool Night Sky], [Warm Glowing Nightscape], [Artistic Nightscape], 

[Handheld Night Shot] (Scene Guide Mode)

 •When [Silent Mode] is set to [ON]

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Reviews:

No comments