Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 158

Page: 158 / 343

158

Stabiliser, Zoom and Flash

Using Zoom

●

If you assign [Ex. Tele Conv.] to [Fn Button Set] in the [Custom] ([Operation]) menu, you can

display the Extra Tele Conversion setting screen for both pictures and motion pictures by pressing

the assigned function button. While this screen is displayed, you can change the [Picture Size]

setting by pressing [DISP.] button.

●

This function is not available in the following cases:

•[Toy Effect], [Toy Pop] (Creative Control Mode)

•When [Quality] is set to [ ]

•When recording 4K photos

•When recording using [Post Focus]

•When [HDR] is set to [ON]

•When [Multi Exp.] is set

•When [4K Live Cropping] is set

●

[Ex. Tele Conv.] ([Rec]) is not available in the following case.

•[Handheld Night Shot] (Scene Guide Mode)

●

[Ex. Tele Conv.] ([Motion Picture]) is not available in the following case.

•When using the HDMI output during recording (Except in Creative Video Mode)

[Digital Zoom]

Recording mode:

You can increase the zoom ratio up to 4x higher than the original zoom ratio.
Note that, with Digital Zoom, enlarging will decrease picture quality.

→

[Rec] / [Motion Picture

] → [

Digital Zoom]

Settings: [4x] / [2x] / [OFF]

●

When using [Digital Zoom], we recommend using a tripod and the self-timer

(→

140)

for taking

pictures.

●

The AF area is largely displayed at the centre in the Digital Zoom range.

●

This function is not available in the following cases:

•[Toy Effect], [Toy Pop], [Miniature Effect] (Creative Control Mode)

•When recording using [Post Focus]

•When [HDR] is set to [ON]

•When [Multi Exp.] is set

•When [Quality] is set to [

], [

] or [ ]

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 158 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: