Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 313

Page: 313 / 343

313

Others

Optional accessories

External Flash (optional)

After attaching the flash (DMW-FL200L, DMW-FL360L, DMW-FL580L:

optional), the effective range will be increased when compared to the

camera’s built-in flash.

Preparation

Close the built-in flash and set the Camera [ON/OFF] switch to [OFF].

Removing the hot shoe cover

The hot shoe cover is already attached to the hot shoe at the time of purchase.

Remove the hot shoe cover by pulling it in the direction

indicated by arrow while pressing it in the direction

indicated by arrow

Attach the external flash to the hot shoe and then turn on the camera and the

external flash

•Refer to

(→

163)

for changing the settings for external flashes on the camera.

•Refer to

(→

168)

about the settings for the wireless flash.

When using other commercially available external flashes that don’t offer

direct communication with the camera (DC-GX9)

●

It is necessary to set the exposure on the external flash when it is used. When you use an external

flash in Auto Mode, use an external flash that allows you to set the aperture value and ISO

sensitivity to match the same settings on the camera.

●

Set the camera to Aperture-Priority AE Mode or Manual Exposure Mode and then set the same

aperture value and ISO sensitivity on the external flash. (The proper exposure cannot be achieved

because the aperture value changes in Shutter-Priority AE Mode. The light of the external flash

cannot be properly adjusted since the aperture value cannot be fixed in Programme AE Mode.)

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 313 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: