background image

34

 

LP-V/LP-W Series

Laser marker LP-V series and LP-W series have the following models.

Some of the specifications and the packaged contents vary depending on the model. For details, see “1-3 Specification” (P.36) 

and “1-5 Package” (P.47).

Model

Laser output

Oscillation mode

Marking field [mm]

LP-V10U, LP-V10U-A, LP-V10U-C, LP-V10U-CHN

12W

Pulsed

90 x 90

LP-V15U, LP-V15U-A, LP-V15U-C, LP-V15U-CHN

160 x 160

LP-W052U, LP-W052U-A

5W

CW

55 x 55

 

Model Name Description

LP - V 1 0 U - CHN

q

we

LP - W 05 2 U - A

q

w e

r

r

q

Series name of the product. LP-V series and LP-W series are the fiber laser markers.

w

Represents laser output power class as follows.

1:

Oscillator average output power 12W

05:

Oscillator average output power 5W

e

Represents marking field class as follows.

0:

Marking field 90 mm x 90 mm

5:

Marking field 160 mm x 160 mm

2:

Marking field 55 mm x 55 mm

r

Added if the product has additional features or another specification from standard specification.

-A:

FDA regulations compliant model.

-C:

CE Marking compliant model.

-CHN:

GB standard compliant model. (for use in China)

ME-LP400V-OP-6

Summary of Contents for LP-V Series















































































































































































































































































































































Reviews:

Related manuals for LP-V Series