Panasonic LP-V Series, Operation And Maintenance Manual

Page: 193 / 334

193
⿎ Condition setting of GS1 DataBar
1
2
3
4 5
6
7
8
9
10
11
Description
1 Type :
Specifies the type of GS1 DataBar.
• When the code type is GS1 DataBar, Standard & Truncated, Stacked, or Stacked Omnidirectional are
available.
• When the code type is GS1 DataBar Limited, only Limited is available.
• When the code type is GS1 DataBar Expanded, Expanded or Expanded Stacked are available.
Reference
• When GS1 DataBar Limited is used, select how to specify the guard pattern width in “Bar Code Setting” (P.257) in
Environment setting.
2 Module width (W) :
Specifies the minimum width of bar or space. Set the larger value than “Line Width” set in laser setting screen.
Setting Range 0.050 to 1.000 mm
3 Bar Code Height *1 :
Lower Bar Code Height *2 :
One Bar Code Height *3 :
Specifies the height of bar code / lower bar code / respective tiers on a multi-tiered bar code.
GS1 DataBar Standard&Truncated, GS1 DataBar Limited, or GS1 DataBar Expanded only
GS1 DataBar Stacked only
GS1 DataBar Expanded Stacked or GS1 DataBar Stacked Omnidirectional only
Setting Range
1.000 to 90.000 mm (LP-V10)
1.000 to 110.000 mm (LP-430 / LP-420 / LP-410)
1.000 to 160.000 mm (LP-435 / LP-425 / LP-V15)
1.000 to 55.000 mm (LP-431 / LP-421 / LP-411 / LP-W052)
4 Invert :
To invert the marking lines of the code symbol, check the box.
With inversion setting bars are not marked, but spaces in the code symbol are marked by laser.
ME-LP400V-OP-6