Panasonic LP-V Series Page 243 Operation And Maintenance Manual Download

Page: 243 / 334

243

4-15-3 Logo File

Logo files contain the graphic data for the marking in VEC or DXF format.

Item

Description

TO MEDIA

Copies the selected logo file stored in the laser marker to the USB media.

FROM MEDIA

Registers the selected logo file stored in the USB media to the laser marker.

DEL REGIST

Deletes the selected logo file from the laser marker.
Select the file to delete and click “EXECUTE”.

DEL MEDIA

Deletes the selected logo file from the USB media.
Select the file to delete and click “EXECUTE”.

Logo file list

Displays the all logo files stored in the laser marker.
Clicking the title line of the list, the files are sorted in ascending or descending order by

the following categories.

•

Logo File

•

File Name

• Modified Date

Reference

• Up to 2048 logo file can be registered into the laser marker.
• Up to 1,445,376 byte logo file can be registered into the laser marker.

ME-LP400V-OP-6

Summary of Contents for LP-V Series















































































































































































































































































































































Search results

Summary of Contents for LP-V Series

Reviews:

Related manuals for LP-V Series

Brands by name

Popular brands

Panasonic LP-V Series, Operation And Maintenance Manual

Search results

Summary of Contents for LP-V Series

Reviews:

Related manuals for LP-V Series

Brands by name

Popular brands