Panasonic LP-V Series, Operation And Maintenance Manual

Page: 221 / 334

221
⿎ Trigger Selection
Sets the timing of marking start.
• Trigger Marking : Starts the marking per marking trigger.
• Equidistant Marking : Repeats marking with the interval specified while the marking trigger is turned to ON.
(1) Trigger Marking
Starts marking to flying object per marking trigger. Setting parameters vary depending on whether the encoder is used or
not.
When the encoder is not used
(Encoder signal: invalid)
When the encoder is used
(Encoder signal: valid)
1
2
3
4
5
3
1
Description
1 Delay Distance
Inputs the moving distance of line from trigger input to the
start of marking.
Setting Range 0 to 500.00 mm
Reference
• Set a delay distance shorter than the distance between the
workpieces.
• When the next trigger signal is inputted during delay, warning
(E800) occurs. (Only if “Detect TRIG. Warning during Marking”
in Environment Setting is valid.)
2 Line Speed
Inputs the line speed. Available when encoder setting is disabled.
Setting Range
0.060
to
240.000 m/min (LP-430 / LP-420 / LP-435 / LP-425 / LP-V10 / LP-V15)
0.060
to
170.000 m/min (LP-410)
0.060
to
120.000 m/min (LP-431 / LP-421 / LP-W052)
0.060
to
85.000 m/min (LP-411)
3 Encoder Signal
Enable this function when using the encoder. The setting parameter for the line speed is disappeared from the
screen and the parameter for encoder pulse number appears instead when pressing the box.
When the encoder is
not used : Performs marking to flying object by applying the calculated line speed already input.
When the encoder is
used : Performs marking to flying object by applying the calculated line speed which is derived
from the pulse sent from the encoder input to the input terminal.
Sensor
Delay distance
Work direction
5
ME-LP400V-OP-6