Panasonic LP-V Series, Operation And Maintenance Manual

Page: 127 / 334

127
4-3-2 Image Display
1
2
8
10
11
3
4 5
7
6
9
12
Description
1 FILE:
Displays selected file No. and file name.
2 Image Display:
Displays image to be marked.
3 Magnification:
Sets the magnification ratio of the image display. The display magnification can be specified by pressing numeric.
4 Zoom-in / Zoom-out of Image Display :
Zooms in/out image display. The image can be zoomed in and out by 18 steps.
5 Center of Image Display :
Set the origin center to image display position.
6 Image Display Position :
Indicates where the current image is in the marking field.
7 Shift Display Position :
Shifts image display position up and down, left and right. Pressing arrow shifts the image display position.
8 ADJUST. (Operator Adjustment) :
Shifts to operator adjustment screen.
9 Area No.:
Displayed when marking on-the-fly is set in “Trigger setting”. It indicates the order of the marking field for the
concatenated marking to flying object.
Press [+] [-] for switching Area No., and then the image corresponding to Area No. is displayed.
10 SETTING :
Shifts to each setting screen.
11 MAINTNC.(Maintenance) :
Shifts to Maintenance screen.
12 START/STOP
Starts or stops RUN mode.
Under RUN mode, marking (laser emission) starts by setting ON the trigger input of the I/O terminal.
ME-LP400V-OP-6