Page 1-48
Check Every 140 Hours (Every Week)
1-4-7
Checking the Movement of Safety Area Sensor (Rear Side) : General safety specification
∗
This section describes the operation with the power turned on at the rear side of machine.
Check the proper operation of safety area sensor (rear side).
Checking
“1-4-5 Checking the Movement of Safety Area Sensor (front side)”
1-4-8
Cleaning the Nozzle Stocker and Nozzle (Rear Side)
This is the unit to stock the nozzle. Each type of nozzle can be set according to production. The
transfer head changes and chucks the nozzle from this unit if necessary.
Dirt on the nozzle stocker causes that on the nozzle reflector.
1.
Turn off the servo switch.
∗
Otherwise, check that it has already been
turned off.
2.
Remove the tube feeder from the tube
feeder base of feeder bay 4.
Removing the tube feeder
“OPERATING MANUAL (For Operators)”
3.
Press
UNLOCK
and .
• The shutter of nozzle stocker opens.
L13EB
DO NOT DISABLE SAFETY SENSOR.
You will have serious injury by active part if you disable safety sensor.
Do not remove the sensor, put any objects in or turn off the switch so that the safety sensor work properly
and effectively.
WARNING
Noz stk
shtr open
OFF ( ) ON ( )
SERVO
493C-E-MMA01-A06-01
Summary of Contents for KXF-493C
Page 2: ......
